KSO 800/1-C40 Compact Mid-frequency Heater, Power Class 800 kW

This heater series is designed for induction heating of square or round cross-sectional steel billets up to forging temperatures.  One part of this system is the bin unloader, which handles emptying the bins into the the second module, a vibratory interfeeder.  The interfeeder automatically regulates the level of billets in the drum feeder (about 400 kg).  Billets leave the drum feeder oriented lengthwise and consecutively to a conveyor with a roller mechanism.  These rollers are driven and their rotation speed can be adjusted on the control panel.  The roller mechanism feeds the billets into the inductor.  Billets can leave the inductor one of two ways:

1. Gravitationally - this is rather designed for shorter billets.  The billets fall into a fixed chute.
2. Roller extractor - must be manually set in place for longer billets just after the inductor exit. This helps guide the billets leaving the inductor in such a manner that that billet exit angle doesn't change until the entire billet is clear of the inductor core.

For both exit systems, it is possible to use a billet separator which functions to separate billets which are occasionally stuck to each other.  Furthermore, the heater is equipped with a hot billet sorter, which blocks improperly-heated billets (either underheated or overheated) from being delivered to the press.  Heater controls are handled by a Siemens programmable logic controller (PLC).  The temperature of each billet is measured by a non-contact pyrometer and the date/time stamp and temperature value can be stored in the PLC memory.  The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive display.  The heater parameters (desired temperature, power level, temperature ranges, employee login, etc) are all set on the PLC display.  This same display also communicates any faults in the induction heating system to the operator.

Ohřívač KSO 800/1-C40

Heater KSO 800/1-C40 - supplied to VIVA Zlín

Basic Technical Parameter KSO 800/1-C40