Pyrometer UPF IV

Diese Serie wurde durch UPF V Pyrometer ersetzt.

Narrow-band UPF IV pyrometers serve for non-contact temperature scanning of molten and solid masses in metallurgy, forges, glassworks, coking plants, fireclay factories, hardening shops, wire works, chemical plants, engineering factories, and scientific laboratories. The temperature values can be processed by a programmable logic controller or a digital controller.

When the temperature of the environment is above 65 °C or the environment is dusty, an optional pyrometer shell can be used. The cover is equipped with water cooling which protects the pyrometer from high temperature and mechanical damage.

A pyrometer calibration certificate certifies accordance with national etalons corresponding to the international system of units SI.

Technical Parameters

UPF IV			1000	1200	1300	1400
Nominal temperature for	ε = 1	[°C]	1000	1200	1300	1400
Measuring Range for	ε = 1	[°C]	700 - 1000	800 - 1200	800 - 1300	900 - 1400
Nominal bearing distance	L	[m]	0,5 or 1,0
Target Point Diameter D	L=0,5m L=1,0m	[mm]	7 17	4,7 11,2	3,6 8,5	3,6 8,5
Bearing distance range		[%]	± 50	± 30	± 25	± 25
Output signal voltage U_N		[V]	0 - 10
Minimal Resistor Load R		[Ω]	500
Voltage Output Table		č.v.	4-909/005
% of Accuracy		[%]	1
Spectral Sensitivity		[μm]	0,8 - 1,1
Reaction Speed at Step Change		[ms]	100
Operational Temperature	-real -max.	[°C]	45 55
Supply voltage U_N		[VDC]	22 - 27
Standby Current at U_N=24VDC		[mA]	< 16
Weight	L=0,5m L=1,0m	[kg]	0,45 0,4
Dimensions Ø x 1	L=0,5m L=1,0m	[mm]	Ø40 x 321 Ø40 x 284

Notes:

When using different scanning distances that those listed, the diameter of the measuring point is always larger.
The presented reproducible accuracy applied to the upper-half of the range.

If necessary, these models can be supplied with modifications to various input voltages and/or different temperatures measuring ranges.

Pyrometer UPF IV

Technical Parameters

Produkte

Reparaturen